Select Page

If you’re a proud owner of a Benelli Nova, you know it’s a gem that deserves top-notch care. In this article, we’ll delve into the nitty-gritty of how to clean your Benelli Nova, ensuring it always operates at peak performance.

We’ll cover everything from the basic disassembly process to the careful cleaning of each part. Whether you’re a novice or a seasoned gun owner, you’ll find these tips helpful. So, let’s dive in and learn how to give your Benelli Nova the TLC it deserves.

Basic Disassembly of the Benelli Nova

One of the first steps to a proper cleaning routine for your Benelli Nova is the disassembly process. Knowing how to disassemble your shotgun properly is crucial, not only for cleaning but also for general maintenance and troubleshooting needs.

To begin, ensure that your shotgun is unloaded. Safety is always first, and it’s important to double-check before you start the disassembly process. After that, you’ll need to focus on removing the major parts of the shotgun, starting with the barrel and the magazine tube cap.

First, unscrew the magazine tube cap. You’ll find this at the end of the barrel, and it can typically be unscrewed by hand. Once you’ve removed it, you can slide the barrel off the end of the magazine tube, with a bit of a pull and twist motion.

Next, remove the forearm. That’s the part you hold when you’re shooting. You can slide this off after the barrel is removed.

The trigger group comes next in line. For taking out the trigger group, also known as trigger assembly, you must locate and push out the two pins that hold it in. These are usually found on the side of the receiver. After pushing out the pins, the trigger group should come out with a slight pull.

Don’t forget to be gentle during your entire disassembly process. It’s important not to force elements that don’t want to move. Guns are precision tools, and they need to be treated with care.

Well, that’s it for the disassembly of your Benelli Nova. Now, you’re ready to move onto the cleaning process, which we will dive into in the next section.

Remember: practice makes perfect. The more often you disassemble and reassemble your Nova, you’ll get more proficient at the process. It might seem cumbersome at first, but in no time, you’ll be doing it like a pro.

Cleaning the Barrel and Choke Tubes

Once you’ve successfully disassembled your Benelli Nova, it’s time to proceed with cleaning the barrel and choke tubes. This is an essential aspect of the overall maintenance routine—I can’t stress its importance enough.

Start by purchasing a good cleaning kit. If you’re a seasoned shotgun user, you’ll know that some kits specialise in specific gun models. I’d recommend picking a kit that’s Benelli Nova-friendly. This usually contains a cleaning rod, patches, brushes and gun cleaning grease.

1. Get Started With Cleaning The Barrel

Firstly, attach a bronze brush to your cleaning rod. Apply some gun cleaning solvent to the brush. Be liberal with it—you need the solvent to break up all that stubborn grime. Now, push the brush through the barrel, starting from the breech end. Make a few passes until it’s thoroughly coated with the solvent.

Let it sit for a few minutes—this allows the solvent to work its magic on any stubborn grime. After letting it sit, use the cleaning rod and dry patches to remove the loosened fouling. Repeat this until the patches come out clean.

2. Move to the Choke Tubes

After ensuring the barrel is squeaky clean, let’s move on to the choke tubes. They’re smaller and require as much—if not more—attention than the barrel. Remove the chokes from the shotgun if you haven’t done so during the disassembly.

Use your brush and solvent again to make multiple passes through each choke tube. Let the solvent sit, then clean with dry patches similarly to how you did with the barrel.

Every so often, give your choke tubes a good inspection for wear and tear. If you spot any damage, don’t hesitate to replace them—it strengthens both your safety and the overall longevity of your Benelli Nova.

Armed with this knowledge, you’re set to maintain the life force of your shotgun. Well-cleaned barrels and choke tubes play a major role in ensuring excellent performance and longevity. And now you know how to achieve just that! Remember: treat your Benelli Nova well, and it’ll return the favor.

In the next section, we’ll move on to cleaning the bolt and trigger group. This is another crucial step—so keep that guide handy, stay tuned, and continue on this journey with me.

Removing and Cleaning the Bolt Assembly

Digging deeper into Benelli Nova’s workings, we’ll next tackle Removing and Cleaning the Bolt Assembly. Ensuring this part of your gun is clean and in good shape is crucial in maintaining the shotgun’s performance.

Remember, safety should be your highest priority. Be sure you’ve completely unloaded the gun and removed any remaining shells in the chamber. To disassemble the bolt assembly, you’ll first need to unlock and remove the bolt handle. It can be accessed by pushing inward from the shotgun’s right side.

Now that the bolt handle is removed, slide the bolt assembly from the receiver. It’s essential to handle these parts with utmost care to prevent damage.

Next, focus on the bolt assembly cleaning. You’ll need a cleaning rod, brush, gun cleaning solvent, and clean lint-free cloths or patches. These are your tools of the trade when cleaning any gun, and their careful use can keep your Nova shotgun functioning at peak performance.

Apply the gun cleaning solvent to the brush and run it through the bolt assembly, ensuring every nook and cranny gets the attention it deserves. Don’t forget to clean the locking head and firing pin. After a good scrub, wipe down the entire assembly with a clean cloth, removing any solvent and loosened debris.

In the cleaning process, pay special attention to any signs of wear and tear. If you find extraordinarily worn or damaged parts, it may be time to replace them. This is vital for ensuring the longevity of your shotgun and its continuous smooth operation.

Next in our cleaning manual, we’ll deep dive into cleaning Nova’s trigger group. Just as with the bolt assembly, it needs regular cleaning and inspected for any damaged parts. Stay with us as we navigate this next vital step to keep your Benelli Nova in top-notch shape.

Cleaning the Trigger Assembly

Next up in the cleaning process is the trigger assembly. Despite appearing complex, delicate, and downright intimidating to beginners, cleaning this part isn’t as daunting as it seems. Much like the bolt assembly, it’s imperative to handle this component with care and respect.

The trigger assembly functions as the crux of your firearm. Over time, build-up of dirt, grime, and rust can eventually lead to malfunctions. Regular upkeep maintains the shotgun’s performance and extends the life of your Benelli Nova.

First, let’s start by removing the assembly from the shotgun. You’ll find a pin connecting it to the system. Using a pin punch or a similar tool, slowly push out the pin and gently remove the trigger assembly.

To clean this crucial component, you’ll be needing some vital tools. Here’s what you’ll need:

  • Gun cleaning solvent: this dissolves accumulated grime, allowing for easier cleaning.
  • Soft brush or old toothbrush: ideal for scrubbing off stubborn dirt without causing any scratches.
  • Lint-free cloth or patches: you’ll use these to wipe off the solvent and any loose dirt.

Apply the solvent to the brush and begin scrubbing the assembly, ensuring every nook and cranny gets attention. Remember, heavy scrubbing’s not your goal—gentle yet thorough cleaning is. Once you’ve covered each part, use the cloth or patches to clear off the solvent along with the dissolved dirt and grime.

Routine inspection for wear and tear is crucial during the cleaning process. If an issue arises, don’t attempt to fix it unless you’re experienced in firearm maintenance. Amateur fixes may backfire and even damage the firearm beyond repair. Instead, I’d recommend getting professional assistance.

Gone through the steps without any hitches? Great! But the process doesn’t end here. Your Benelli needs more care and attention to keep it in top shape.

Lubrication and Reassembly of the Benelli Nova

Now that we’ve taken care of cleaning the trigger assembly, it’s time to delve into the next pivotal stage – the lubrication and reassembly of your Benelli Nova.

Lubrication greatly aids in the smooth functioning of the shotgun. Begin with a high-quality gun lubricant. Make sure to lightly coat the inside of the frame where the bolt assembly slides. Also, apply a touch of oil to the trigger group. Remember, over-lubrication can attract dirt and other residues, so it’s essential to keep the use of the lubricant to a ‘less is more’ approach.

Once done with lubrication, let’s shift focus to reassembly. Each part must return to its dedicated place, intact and secure. We’ll start by inserting the trigger assembly back into the receiver. It should “click” into place – that’s your sign that it’s securely in its rightful position.

Next, take the bolt assembly. Slide it into the receiver from the rear. Keep an eye out on the shell lifter; it should be in the down position before reinserting the bolt.

The final component to join the reunion is the barrel. Line it up properly before securing it to the receiver. Remember, the barrel should slide on without the need to apply excessive force.

One important factor to bear in mind while reassembling the shotgun is to take your time. It’s a process that can’t be rushed. Misplacement of components can lead to accidents, so refrain from hurrying the procedure.

A remarkable aspect worth noting is that the Benelli Nova has a reputation for simplicity and functionality in its design, making the reassembly process relatively more comfortable for novices and experts alike.

Reassembly is not just about piecing back the components. It’s equally about ensuring the shotgun is ready to perform at its peak again. Therefore, after the assembly, it’s a prudent call to do a quick functionality check. Cycle the action a few times – the bolt should move back and forth smoothly.

A successfully cleaned, lubricated, and assembled Benelli Nova is your gateway to reliable, high-performance shooting. Whether for hunting or target shooting, its maintenance routine is paramount to your safety and the shotgun’s longevity.


Cleaning a Benelli Nova isn’t as daunting as it may seem. With the right tools and a bit of patience, you’ll have your shotgun in tip-top shape in no time. Remember, the trigger assembly is delicate, so handle with care. If you notice any wear and tear, don’t hesitate to seek professional help. Lubrication is key to keeping your Benelli Nova functioning smoothly, so don’t skimp on this step. The design of this shotgun makes reassembly a breeze, even for beginners. Lastly, never forget to conduct functionality checks after reassembly. Regular maintenance is your best bet for ensuring the reliability and longevity of your Benelli Nova. So, roll up your sleeves and give your shotgun the TLC it deserves. Happy cleaning!

Frequently Asked Questions

Q: What tools do I need to clean the trigger assembly of a Benelli Nova shotgun?

A: To clean the trigger assembly of a Benelli Nova shotgun, you will need gun cleaning solvent, a soft brush or toothbrush, and lint-free cloths or patches.

Q: How should I inspect the trigger assembly for wear and tear?

A: Inspect the trigger assembly of a Benelli Nova shotgun for wear and tear by visually examining all the components for any signs of damage or excessive wear.

Q: What should I do if I notice any issues with the trigger assembly?

A: If you notice any issues with the trigger assembly of your Benelli Nova shotgun, it is recommended to seek professional assistance from a qualified gunsmith.

Q: Why is lubrication important for the Benelli Nova shotgun?

A: Lubrication is important for the Benelli Nova shotgun as it helps prevent excessive wear, reduces friction, and ensures smooth operation of the firearm.

Q: How do I lubricate the Benelli Nova shotgun?

A: To lubricate the Benelli Nova shotgun, apply a small amount of gun lubricant to the moving parts of the trigger assembly and other relevant components as per the manufacturer’s instructions.

Q: How do I reassemble the Benelli Nova shotgun after cleaning?

A: When reassembling the Benelli Nova shotgun after cleaning, carefully place each component back in its proper position, following the manufacturer’s guidelines.

Q: Is reassembling the Benelli Nova shotgun easy for beginners?

A: Yes, the Benelli Nova shotgun’s design is simple and functional, making the reassembly process relatively easier for both beginners and experienced users.

Q: Why is it important to perform functionality checks after reassembly?

A: Performing functionality checks after reassembly is crucial to ensure that all components are properly aligned and functioning correctly, ensuring the shotgun’s safety and performance.

Q: What is the overall maintenance routine for the Benelli Nova shotgun?

A: To maintain the reliability and longevity of the Benelli Nova shotgun, it is recommended to clean and lubricate the firearm regularly, inspect for wear and tear, and seek professional assistance for any issues.